Manoli Zubitur
Research Staff
Coordinator
Física de polímeros multifásicos avanzados
Física de polímeros y fabricación avanzada
Manoli Zubitur earned her BSc, MSc and PhD in Chemistry from the University of the Basque Country in Donostia-San Sebastián. She did postdoctoral research at Emulsion Polymers Institute (EPI) in Lehigh University (PA, USA) (2001-2002).She also possesses a BSc and MSc in Environmental Sciences from the Universidad Nacional a Distancia (UNED) and a Master degree in Higher Education by the same university.
She is an associate professor in the Chemical and Environmental Engineering Department of the University of the Basque Country (UPV/EHU) at Donostia-San Sebastián since 2006.
Her research has been focused on properties and characterization of semi-crystalline polymers, nanocomposites of polymers with clays and layered double hydroxides with interest in thermodegradative and flammability behavior.
Her fields of interest include also the preparation and characterization of polymer based nanocomposites for controlled drug release.
Crystallization-Driven Quadrant-Specific Spherulitic Self-Assembly in Partially Miscible Biodegradable PBS/PCL/PBS-ran-PCL Blends
M. Safari, R. Kneepkens, R. Perez-Camargo, A. Mugica, M. Zubitur, M. Burghammer, G. Liu, D. Wang, J. Harings and A.J. Müller
How chain stereoconfiguration and molecular weight influence Poly(propylene oxide) crystallization
J. Torres-Rodriguez, C. Fornaciari, R. Perez-Camargo, A. Mugica, M. Zubitur, G. Preda, D. Pasini, O. Coulembier and A.J. Müller
Eco-sustainable magnetic polymer composites using recycled and rare-earth-free hard magnetic fillers
A. Haghighat, E. Matxinandiarena, M. Zubitur, A. Mugica, F. Bellato, A. Ferretti, A. Ponti, S. Ammar, M. Abdolrahimi, G. Varvaro, P. Maltoni, D. Cavallo, A. Omelyanchik, A.J. Müller and D. Peddis
Effect of chemical structure on the crystallization kinetics of triple polymorphic high-sulfur-content polythioethers
V. Pirela, L. Unanue, J. Elgoyhen, J. Ramos, J. Vega, A. Mugica, M. Zubitur, C. Quoc Le, A. Chemtob, R. Tomovska, G. Reiter, J. Martín and A.J. Müller
The Use of Biodegradable Poly(e-Caprolactone) as a Matrix for Preparing Micro-Composites with NdFeB Recycled Magnetic Particles
E. Matxinandiarena, A. Mugica, M. Zubitur, R. Trouillet, S. Ammar and A.J. Müller
How the Aliphatic Glycol Chain Length Determines the Pseudoeutectic Composition in Biodegradable Isodimorphic poly(alkylene succinate-<i>ran</i>-caprolactone) Random Copolyesters
M. Safari, J. Torres, R. Perez-Camargo, A. de Ilarduya, A. Mugica, M. Zubitur, H. Sardon, G. Liu, D. Wang and A.J. Müller
Influence of chain topology on gel formation and direct ink printing of model linear and star block copolymers with poly(ethylene oxide) and poly(e-caprolactone) semi-crystalline blocks
Centeno E., Peñas M.I., Zhang P., Ladelta V., Mercado-Rico J., Matxinandiarena E., Zubitur M., Mugica A., Hadjichristidis N., A.J. Müller and Hernández R.
Editorial Special Issue: ``Advance Polymeric Materials: Synthesis, Properties and Applications''
M. Zubitur
Supernucleation Dominates Lignin/Poly(ethylene oxide) Crystallization Kinetics
M. Taverna, A. Altorbaq, S. Kumar, J. Olmedo-Martinez, C. Busatto, M. Zubitur, A. Mugica, V. Nicolau, D. Estenoz and A.J. Müller
Biodegradable binary blends of poly (butylene succinate) or poly (e-caprolactone) with poly (butylene succinate-ran-e-caprolactone)copolymers: Crystallization behavior
M. Safari, R. Pérez-Camargo, L. Ballester-Bayarri, G. Liu, A. Mugica, M. Zubitur, D. Wang and A.J. Müller
Structure and Properties of Reactively Extruded Opaque Post-Consumer Recycled PET
M. Candal, M. Safari, M. Fernandez, I. Otaegi, A. Mugica, M. Zubitur, G. Gerrica-echevarria, V. Sebastian, S. Irusta, D. Loaeza, M. Maspoch, O. Santana and A.J. Müller
Crystallization and morphology of triple crystalline polyethylene-b-poly(Ethylene oxide)-b-poly(e-caprolactone) pe-b-peo-b-pcl triblock terpolymers
E. Matxinandiarena, A. Múgica, M. Zubitur, V. Ladelta, G. Zapsas, D. Cavallo, N. Hadjichristidis and A.J. Müller
The Effect of the Cooling Rate on the Morphology and Crystallization of Triple Crystalline PE-b-PEO-b-PLLA and PE-b-PCL-b-PLLA Triblock Terpolymers
E. Matxinandiarena, A. Mugica, M. Zubitur, B. Zhang, V. Ladelta, G. Zapsas, N. Hadjichristidis and A.J. Müller
Controlling the Isothermal Crystallization of Isodimorphic PBS-ran-PCL Random Copolymers by Varying Composition and Supercooling
M. Safari, A. Mugica, M. Zubitur, A. Martinez de Ilarduya, S. Munoz-Guerra and A.J. Müller
Tailoring the isothermal crystallization kinetics of isodimorphic poly (butylene succinate-ran-butylene azelate) random copolymers by changing composition
I. Arandia, N. Zaldua, J. Maiz, R. Perez-Camargo, A. Mugica, M. Zubitur, R. Mincheva, P. Dubois and A.J. Müller
Crystallization kinetics as a sensitive tool to detect degradation in poly(lactide)/poly(epsilon-caprolactone)/ PCL-co-PC copolymers blends
G. Giacobazzi, M. Rizzuto, M. Zubitur, A. Mugica, D. Caretti and A.J. Müller
The Effect of Titanium Dioxide Surface Modification on the Dispersion, Morphology, and Mechanical Properties of Recycled PP/PET/TiO2 PBNANOs
E. Matxinandiarena, A. Mugica, M. Zubitur, C. Yus, V. Sebastian, S. Irusta, A. David Loaeza, O. Santana, M. Maspoch, C. Puig and A.J. Müller
Tuning the Thermal Properties and Morphology of Isodimorphic Poly[(butylene succinate)-ran-(epsilon-caprolactone)] Copolyesters by Changing Composition, Molecular Weight, and Thermal History
M. Safari, A. Martinez de Ilarduya, A. Mugica, M. Zubitur, S. Munoz-Guerra and A.J. Müller
Influence of Chain Topology (Cyclic versus Linear) on the Nucleation and Isothermal Crystallization of Poly(L-lactide) and Poly(D-lactide)
N. Zaldua, R. Lienard, T. Josse, M. Zubitur, A. Mugica, A. Iturrospe, A. Arbe, J. De Winter, O. Coulembier and A.J. Müller
Crystallization kinetics of polylactide: Reactive plasticization and reprocessing effects
B. Bruster, A. Montesinos, P. Reumaux, R. Perez-Camargo, A. Mugica, M. Zubitur, A.J. Müller, P. Dubois and F. Addiego
Crystallization and morphology of block copolymers and terpolymers with more than one crystallizable block
J. Palacios, A. Mugica, M. Zubitur and A.J. Müller
Can poly(epsilon-caprolactone) crystals nucleate glassy polylactide?
M. Rizzuto, L. Marinetti, D. Caretti, A. Mugica, M. Zubitur and A.J. Müller
Dielectric, mechanical and transport properties of bisphenol A polycarbonate/graphene nanocomposites prepared by melt blending
A. Oyarzabal, A. Cristiano-Tassi, E. Laredo, A. Bello, M. Zubitur, A. Mugica and A.J. Müller
The Complex Amorphous Phase in Poly(butylene succinate-ran-butylene azelate) Isodimorphic Copolyesters
I. Arandia, A. Mugica, M. Zubitur, R. Mincheva, P. Dubois, A.J. Müller and A. Alegria
Crystallization of Cyclic Polymers
R. Pérez-Camargo, A. Mugica, M. Zubitur and A.J. Müller
Self-Nucleation of Crystalline Phases Within Homopolymers, Polymer Blends, Copolymers, and Nanocomposites
R. Michell, A. Mugica, M. Zubitur and A.J. Müller
The role of PLLA-g-montmorillonite nanohybrids in the acceleration of the crystallization rate of a commercial PLA
N. Zaldua, A. Mujica, M. Zubitur, A. Iturrospe, A. Arbe, J. Raquez, G. Lo Re, P. Dubois and A.J. Müller
Application of SSA Thermal Fractionation and X-Ray Diffraction to Elucidate Comonomer Inclusion or Exclusion from the Crystalline Phases in Poly(butylene succinate-ran-butylene azelate) Random Copolymers
I. Arandia, A. Mugica, M. Zubitur, A. Iturrospe, A. Arbe, G. Liu, D. Wang, R. Mincheva, P. Dubois and A.J. Müller
Synthesis and Characterization of Double Crystalline Cyclic Diblock Copolymers of Poly(epsilon-caprolactone) and Poly(l(d)-lactide) (c(PCL-b- PL(D)LA))
R. Liénard, N. Zaldua, T. Josse, J. De Winter, M. Zubitur, A. Mugica, A. Iturrospe, A. Arbe, O. Coulembier and A.J. Müller
Plasticization and Cocrystallization in LLDPE/Wax Blends
T. Gumede, A. Luyt, R. Perez-Camargo, A. Iturrospe, A. Arbe, M. Zubitur, A. Mugica and A.J. Müller
Hydrolytic degradation of nanocomposites based on poly(l-lactic acid) and layered double hydroxides modified with a model drug
A. Oyarzabal, A. Mugica, A.J. Müller and M. Zubitur
Sequential crystallization and morphology of triple crystalline biodegradable PEO-b-PCL-b-PLLA triblock terpolymers
J. Palacios, A. Mugica, M. Zubitur, A. Iturrospe, A. Arbe, L. Guoming, D. Wang, J. Zhao, N. Hadjichristidis and A.J. Müller
Plasticization and anti-plasticization effects caused by poly(lactide-ran-caprolactone) addition to double crystalline poly(L-lactide)/poly(epsilon-caprolactone) blends
M. Rizzuto, A. Mugica, M. Zubitur, D. Caretti and A.J. Müller
How Composition Determines the Properties of Isodimorphic Poly(butylene succinate-ran-butylene azelate) Random Biobased Copolymers: From Single to Double Crystalline Random Copolymers
I. Arandia, A. Mugica, M. Zubitur, A. Arbe, G. Liu, D. Wang, R. Mincheva, P. Dubois and A.J. Müller
Thermal decomposition of phenoxy/clay nanocomposites: Effect of organoclay microstructure
M. Angeles Corres, M. Zubitur, M. Cortazar and A. Mugica
Multimonomer emulsion copolymerization in presence of inhibitors
M. Zubitur, S. Ben Amor, C. Bauer, B. Amram, M. Agnely, J.R. Leiza and J. Asua
Mathematical modeling of multimonomer (Vinylic, divinylic, acidic); emulsion copolymerization systems
M. Zubitur, P. Armitage, S. Ben Amor, J.R. Leiza and J. Asua
Improving chain transfer agent mass transfer in the semicontinuous; emulsion copolymerization of vinyl acetate/butyl acrylate
M. Zubitur and J. Asua
Factors affecting kinetics and coagulum formation during the emulsion copolymerization of styrene/butyl acrylate
M. Zubitur and J. Asua
Agitation effects in the semicontinuous emulsion polymerization of; styrene and butyl acrylate
M. Zubitur and J. Asua
Diffusional limitations in emulsion polymerization
M. Zubitur, J. Mendoza, José C. DE LA CAL and J. Asua
Crystallization of Cyclic Polymers
R. Pérez-Camargo, A. Mugica, M. Zubitur and A.J. Müller


