Robert Aguirresarobe
Research Staff
Coordinator
Física de polímeros y fabricación avanzada
Reología y fabricación avanzada
Robert Aguirresarobe earned his BS, MS and PhD in Chemistry from the University of the Basque Country in Donostia-San Sebastián. During his PhD he focused his work in the synthesis of waterborne polyurethanes with self-healing characteristics. Afterwards, he joined the Rheology group of POLYMAT, working on the rheological characterization of dynamic polymers and additive manufacturing techniques. Since December 2019, he is assistant professor of the University of the Basque Country in Material Science.
He has received the KUTXA prize (2008) for the best marks in Chemistry in the Chemistry Faculty of San Sebastián.
Currently, its research is focused on the rheological implications additive manufacturing technologies (3D printing) and dynamic polymer structures. His research aims to model the flow and viscoelastic features of additive manufacturing technologies, providing methodologies to avoid trial and error in new material development. This model are currently being applied to the development materials for 3D printed scaffolds and pharma solutions.
Piezoelectric polylactic acid-based biomaterials: Fundamentals, challenges and opportunities in medical device design
R. Schonlein, P. Bhattarai, M. Raef, X. Larranaga, A. Poudel, M. Biggs, R. Aguirresarobe and J. Ugartemendia
Injectable and viscoelastic click alginate hydrogels for spatio-temporal T cell administration in vivo
Berasain J., Manzano S., Mitxelena-Iribarren O., Heras U., Romo-Valera A., Azcoaga P., Iturriaga L., Egia-Mendikute L., Palazón A., Fernández M., Caffarel M.M., Aguirresarobe R. and Cipitria A.
3D printable polybutylene-succinate-co-adipate/carbon nanotube conductive nanocomposites: Effect of shearing on electrical conductivity
Pascal A., Iruretagoyena E., Calafel M.I., Fernández M., Guerrica-Echevarria G., Aranburu N. and Aguirresarobe R.
Hierarchical tuning of viscoelasticity in tetra-PEG hydrogels via Au(I)–thiolate coordination
Insua I., Aguirresarobe R., de Souza Nunes J., Dupin D., Acera A., Calafel I. and Fernandez M.
Thermodynamic signature of the topological transition at Tv in a vinylogous urethane vitrimer
Gracia-Fernández C., Ballester-Bayarri L., Ballard N., Aguirresarobe R., Gómez-Barreiro S. and Fernandez M.
Rheology-guided experimental design of dynamically crosslinked keratin/?-carrageenan hydrogels as potential drug delivery systems
Fratini C., Tiboni M., Calafel I., Fernández M., Aguirresarobe R., Aluigi A. and Casettari L.
The Effect of Nanomechanical Stimulation Strategies on the Shear Piezoelectric Response of Poly(l-lactide) (PLLA)
R. Schönlein, P. Bhattarai, A. Poudel, R. Aguirresarobe, M. Biggs and J. Ugartemendia
Dynamic heterogeneity and cooperativity in polyurethane-based vitrimers
M. Pieruccini, M. Fernández, G. Vozzolo, M. Ximenis, R. Aguirresarobe and J. Vega
Rheological Insight into the 3D Printability of Carboxymethyl Cellulose-Based Hydrogels
I. Insua, O. Etzold, I. Calafel, R. Aguirresarobe, M. Calderón and M. Fernández
From rheological concepts to additive manufacturing assessment of hydrogel-based materials for advanced bioprinting applications
M. Calafel, M. Criado-Gonzalez, R. Aguirresarobe, M. Fernández and C. Mijangos
Characterization techniques of hydrogels in healthcare
I. Insua, M. Calderón, I. Calafel, M. Fernandez and R. Aguirresarobe
Continuous carbon fiber Additive Preforming and its application for the fabrication of epoxy composites
E. Hernández-Murillo, I. Otaegi, I. Calafel, L. Palenzuela, R. Mezzacasa, C. Elizetxea, G. Guerrica-Echevarría, N. Aranburu and R. Aguirresarobe
Vat Photopolymerization of High Molecular Weight Polymer Latexes with Pseudothermoplastic Properties for Recyclability
J. Ayestaran, X. de Pariza, F. Vidal, C. Vazquez-Martel, A. Pascal, S. Yu, M. Aguirre, A. Nelson, J.R. Leiza, E. Blasco, T. Long, R. Aguirresarobe and H. Sardon
Additive manufacturing of semicrystalline polymers: understanding structural integrity and dimensional accuracy
M. Calafel, R. Pérez-Camargo, R. Aguirresarobe, M. Candal and A.J. Müller
Mechanoresponsive and Mechanoadaptative Polymeric Materials. Rheological Perspective
R. Aguirresarobe, M. Fernandéz and I. Calafel
Flow-induced crystallization of piezoelectric poly(L-lactide) fibers by a one-step melt-spinning process
R. Schönlein, M. Fernández, I. Calafel, M. Azkune, G. Liu, A.J. Müller, J. Ugartemendia and R. Aguirresarobe
3D Printing of Vinylogous Urethane-Based Methacrylic Covalent Adaptable Networks by Vat Photopolymerization
L. Ballester-Bayarri, A. Pascal, J. Ayestaran, A. Gonzalez, N. Ballard and R. Aguirresarobe
Development of Flame-Retardant Polylactic Acid Formulations for Additive Manufacturing
R. Aguirresarobe, I. Calafel, S. Villanueva, A. Sanchez, A. Agirre, I. Sukia, A. Esnaola and A. Saralegi
Controlling associative transcarbamoylation reactions by light in dynamic polyurethane networks using reversible spiropyran photoswitches
G. Vozzolo, F. Elizalde, D. Mantione, R. Aguirresarobe, M. Ximenis and H. Sardon
Tuning Reprocessing Temperature of Aliphatic Polyurethane Networks by Alkoxyamine Selection
F. Elizalde, V. Pertici, R. Aguirresarobe, M. Ximenis, G. Vozzolo, L. Lezama, F. Ruipérez, D. Gigmes and H. Sardon
The Combined Effects of Optical Purity, Chain Orientation, Crystallinity, and Dynamic Mechanical Activation as Means to Obtain Highly Piezoelectric Polylactide Materials
R. Schönlein, X. Larrañaga, M. Azkune, Y. Li, G. Liu, A.J. Müller, R. Aguirresarobe and J. Ugartemendia
Exploiting the Base-Triggered Thiol/Vinyl Ether Addition to Prepare Well-Defined Microphase Separated Thermo-Switchable Adhesives
A. Lamas, L. Polo Fonseca, C. Moussard, D. Zanata, G. Perli, M. Ximenis, X. Lopez de Pariza, G. Seychal, M. Caliari, M. Itxaso, R. Aguirresarobe, I. Calvo and H. Sardon
Enhanced Piezoelectric Properties of Poly(L-lactide) Nanocomposite Microfiber Scaffolds Due to Polydopamine-Coating of Barium Titanate Nanoparticles
R. Schönlein, X. Larrañaga, A. Panfilo, Y. Li, A. Larrañaga, G. Liu, A.J. Müller, R. Aguirresarobe and J. Ugartemendia
On the Progress of 3D Printed Hydrogels Through Fourier Transform Rheology
M. Fernandez, I. Insua, O. Etzold, M. Calderon, R. Aguirresarobe and I. Calafel
Experimental Protocols for Addressing the Viscoelasticity of Vinylogous Urethane Vitrimers
R. Aguirresarobe, L. Ballester, M. Fernandez and N. Ballard
Could the Poly(Lactic Acid) Be a Ductile Material? Rheological and Mechanical Study
I. Calafel, R. Aguirresarobe, A. Erkizia, P. Barari, M. Fernandez, B. Pascual, I. Conde, P. Salse and M. Tierno
Rheological Aspects of Foaming Process in 3D Printing
A. Pascal, R. Aguirresarobe and I. Calafel
Deciphering the Rheological Properties of 3D Printed Semi-interpenetrated Hydrogels
I. Insua, R. Aguirresarobe, M. Fernandez and I. Calafel
Rheological Study of 3D Printed Semi Interpenetrated Networks
J. Ayestaran, H. Sardon, T. Long and R. Aguirresarobe
A Light-Mediated, 3D-Printable, and Self-Healable Polymer Electrolyte for Lithium Batteries
F. Elizalde, S. Trano, J. Ayestarán, X. de Pariza, R. Aguirresarobe, C. Francia, D. Mecerreyes, H. Sardon and F. Bella
Influence of FFF Process Conditions on the Thermal, Mechanical, and Rheological Properties of Poly(hydroxybutyrate-co-hydroxy Hexanoate)
M. Caputo, M. Fernández, R. Aguirresarobe, A. Kovalcik, H. Sardon, M. Candal and A.J. Müller
Scalable synthesis of methacrylate-based vitrimer powders by suspension polymerization
L. Ballester-Bayarri, E. Limousin, M. Fernández, R. Aguirresarobe and N. Ballard
Ammonium polyphosphate-melamine synergies in thermal degradation and smoke toxicity of flexible polyurethane foams
I. Eceiza, R. Aguirresarobe, A. Barrio, M. Fernández-Berridi and L. Irusta
Molecular nanoribbon gels
M. Martinez-Abadia, R. Dubey, M. Fernandez, M. Martin-Arroyo, R. Aguirresarobe, A. Saeki and A. Mateo-Alonso
Self-healable dynamic poly(urea-urethane) gel electrolyte for lithium batteries
F. Elizalde, J. Amici, S. Trano, G. Vozzolo, R. Aguirresarobe, D. Versaci, S. Bodoardo, D. Mecerreyes, H. Sardon and F. Bella
Crystallization-Induced Gelling as a Method to 4D Print Low-Water-Content Non-isocyanate Polyurethane Hydrogels
N. Fanjul-Mosteirin, R. Aguirresarobe, N. Sadaba, A. Larranaga, E. Marin, J. Martin, N. Ramos-Gomez, M. Arno, H. Sardon and A. Dove
Healable and self-healing polyurethanes using dynamic chemistry
R. Aguirresarobe, S. Nevejans, B. Reck, L. Irusta, H. Sardon, J. Asua and N. Ballard
Study of the interlayer adhesion and warping during material extrusion-based additive manufacturing of a carbon nanotube/biobased thermoplastic polyurethane nanocomposite
M. Candal, I. Calafel, M. Fernández, N. Aranburu, R. Aguirresarobe, G. Gerrica-Echevarria, A. Santamaría and A.J. Müller
3D Printable Conducting and Biocompatible PEDOT-graft-PLA Copolymers by Direct Ink Writing
A. Dominguez-Alfaro, E. Gabirondo, N. Alegret, C. De León-Almazán, R. Hernandez, A. Vallejo-Illarramendi, M. Prato and D. Mecerreyes
Single-Ion Conducting Polymer Nanoparticles as Functional Fillers for Solid Electrolytes in Lithium Metal Batteries
L. Porcarelli, P. Sutton, V. Bocharova, R. Aguirresarobe, H. Zhu, N. Goujon, J.R. Leiza, A. Sokolov, M. Forsyth and D. Mecerreyes
Nearly Perfect 3D Structures Obtained by Assembly of Printed Parts of Polyamide lonene Self-Healing Elastomer
K. O'Harra, N. Sadaba, M. Irigoyen, F. Ruiperez, R. Aguirresarobe, H. Sardon and J. Bara
Dynamic polyurethane thermosets: tuning associative/dissociative behavior by catalyst selection
F. Elizalde, R. Aguirresarobe, A. Gonzalez and H. Sardon
Searching for Rheological Conditions for FFF 3D Printing with PVC Based Flexible Compounds
I. Calafel, R. Aguirresarobe, I. Penas, A. Santamaria, M. Tierno, I. Conde and B. Pascual
How is rheology involved in 3D printing of phase-separated PVC-acrylate copolymers obtained by free radical polymerization
M. Peñas, M. Calafel, R. Aguirresarobe, M. Tierno, J. Conde, B. Pascual and A. Santamaría
