Publications
214 publicaciones
Interfacial performance of chemically recycled carbon fibres assessed by microdroplet debonding tests
Boutenel F., Leveziel A., Mebarki T., Seychal G., Thibaud S., Placet V. and Gabrion X.
Nanogels at mucosal interfaces: Functional soft colloids for mucosal drug delivery
Orellano M.S., Elzeiny H.M., Maji R.K., Valverde-Durán S. and Calderón M.
Physiological and pathological roles of inflammasomes in wound healing
Momeny M., Pashaei P., Hafezi A., Hashemi S., Shafikhani S.H., Alizadeh S. and Vosough M.
Phosphonium outperforms ammonium poly(ionic liquids) for fast ion transport polymer electrolytes
Cai K., Puelles J.S., Berzosa A.H., Lingua G., Mecerreyes D., Brandell D., Forsyth M. and Chen F.
Unlocking UCST thermoresponsiveness in degradable bis-MPA polycarbonates through post-polymerization design
Martín-Martín J., Val-Carreres M., Folch-Cirujeda L., Abad M., Martínez-Visus A., Lopez de Pariza X., Sardon H., Oriol L. and Piñol M.
Emerging local homochirality in perylene-based covalent 2D polymers via surface-mediated symmetry breaking
Koek B., Jakubec M., Strutynski K., Franco M.M., Mateo-Alonso A., Mali K.S. and De Feyter S.
Electrically controlled atmospheric water harvesting of 3D printed thermoresponsive hydrogels
Lopez-Larrea N., Rimani H., Olmedo-Martínez J.L., Rivilla I., Urain A., Gabirondo E., Gonzalez A., Alam M.S., Abdel Aziz I. and Mecerreyes D.
Layer-by-Layer Rotated Scaffolds with Enhanced Cell Seeding for SERS-Based Assessment of Chemotherapy Resistance
L. Troncoso-Afonso, M. Henriksen-Lacey, P. Gonzalez-Callejo, M. Amilibia, D. Mejia-Parra, C. Acosta, P. Valera, D. Aberasturi, L. Liz-Marzan and C. Garcia-Astrain
Stepwise enzymatic synthesis of stereoregular poly(hydroxyalkanoates) starting from prochiral ß-Keto esters
Maiz-Iginitz A., Andrés-Sanz D., Gabirondo E., Molteni L., Sardon H. and López-Gallego F.
Comblike copolymers with star conformation as dispersants of pigments in waterborne paint formulations
S. Beldarrain, R. Aceituno, A. Iturrospe, A. Arbe, A. Barquero, E. Gonzalez and J.R. Leiza
Rheology-guided experimental design of dynamically crosslinked keratin/ ?-carrageenan hydrogels as potential drug delivery systems
Fratini C., Tiboni M., Calafel I., Fernández M., Aguirresarobe R., Aluigi A. and Casettari L.
Predicting optimal conditions to reach target particle morphologies in emulsion polymerization: a reverse engineering approach
Vattoly L., Ballard N., Mori Carrascal U. and Lozano J.A.
Surface-Functionalized Nanofibers via Green Electrospinning: A Sustainable Platform for Enzyme Immobilization
M. Martinez, T. Guendulain, M. Heredero, A. Beloqui and E. Gonzalez
Hierarchical Ion-Conducting Materials Based on Polymer-Aligned Nanoparticles within Poly(vinyl benzyl methoxy poly(ethylene oxide) ether)-block-polystyrene Diblock Copolymer
L. Unanue, M. Krol, G. Lingua, J. Olmedo-Martinez, A. Herranz Berzosa, S. Schneider, A. Tercjak, J. Ruokolainen, P. Theato, A.J. Müller and D. Mecerreyes
OperandoElectro-Rheology: Unraveling Decoupled Ion Transport-Mechanical-Morphological Properties in Nanostructured Block Copolymer Electrolytes
Airoldi M., Fernandez M. and Villaluenga I.
Protic Poly(Diallylammonium Sulfonate)s: Toward Water-Processable Fluorine-Free Ionic Materials
Pairetti Y., Rolandi A.C., Casado N., Forsyth M., Gallastegui A. and Mecerreyes D.
Valorizing red cabbage (Brassica oleracea) waste: anthocyanin incorporation in biopolymer matrices for non-contact monitoring of chicken breast quality
Arizanova M., Temkov M., Stanoeva J.P., Merino D. and Velickova E.
A machine learning model for the data-driven design of vitrimer materials
Liu J. and Ballard N.
Thermodynamic signature of the topological transition at Tv in a vinylogous urethane vitrimer
Gracia-Fernández C., Ballester-Bayarri L., Ballard N., Aguirresarobe R., Gómez-Barreiro S. and Fernandez M.
Programming multicrystalline spherulitic superstructures by sequential crystallization in well-defined biocompatible block polymers
Matxinandiarena E., Pérez-Camargo R.A., Zhang P., Ladelta V., Hadjichristidis N. and A.J. Müller
Biomimetic organo-specific scaffolds reveal lineage-specific adaptations of breast cancer cells in bone metastasis
Spadazzi C., Vanni S., De Vita A., Cocchi C., Gabellone S., Miserocchi G., Calabrese C., Dellavalle S., Cani O., Tor L.M.D., Tebaldi M., Urigoitia-Asua A., de Aberasturi D.J., Lizundia E., Mitxelena-Iribarren O., Cipitria A., Musolino A., Casadei C., Sbanchi G., Toma D., Capecchi E., Saladino R., Ibrahim T., Mercatali L. and Liverani C.
Fabrication of photocatalytic nanofibers by suspension electrospinning
Martinez M.A., Arana L. and González E.
Cetuximab-loaded self-assembled polymeric nanoparticles for the integrin-targeted therapy of glioblastoma
Mishra D., Calderón M., Beloqui A. and Sosnik A.
Benzylic Oxidation of Pillar[5]Arene: From Homo- to Cross-Conjugated Macrocyclic Systems
Marco-Guimbao J.J., Meichsner E., Calvo U., Holler M., Delavaux-Nicot B., Matxain J.M., J.L. DELGADO, Nierengarten J.-F. and Nierengarten I.
Engineering Protein-Polymer Hybrid Multilayer Microreactors as Antioxidant and Anti-Inflammatory Therapeutics: Effect of Single Enzyme Nanogel Localization Within the Multilayer Systems
Motta M.A., Martin-Saldaña S., Sánchez-deAlcázar D., Beloqui A., Calderón M. and Larrañaga A.
Restoring Adhesion-Cohesion Balance in High Bio-Content Waterborne Pressure-Sensitive Adhesives through Itaconate Chemistry and Nanocellulose Reinforcement
J. Gupta, E. Malmström, M. Aguirre and R. Tomovska
Fluorinated Fullerene Derivatives for Tin Halide Perovskite Solar Cells With Reduced Carrier Transport Losses
Galve-Lahoz S., Sánchez-Diaz J., Wang L., Marco-Guimbao J., Ji Z., Rodriguez-Pereira J., Diaz-Perez T., Alvarez A.O., Zhang B., Wang D., Lanzetta L., Hayase S., Shen Q., J.L. DELGADO and Mora-Seró I.
Machine Learning-Enabled Prediction of pH-Responsive Curcumin Release From Self-Assembled Nanomicelles
Rahdar A., Fathi-karkan S., Shirzad M. and Aboudzadeh M.A.
Introduction to the Special Issue devoted to the Ferrol Discussion Meeting on polymer physics 2025
Martín J., Nogales A. and A.J. Müller
Polymerizable organic ionic plastic crystals as thermal energy storage systems
de Lacalle J.L., Olmedo-Martínez J.L., Unanue L., Lopez-Morales J., Garcia-Suarez E.J., Casado N. and Mecerreyes D.
In Situ Formation of Gel PolymerElectrolytes According to Battery Technology: A Review
I. Sasiain, A. Fernandez-Tena, A. Mainar, A. Kvasha, E. Iruin, O. Leonet, D. Mecerreyes and J. Blazquez
Molecular recognition guides ionic liquid design for mild PET depolymerization
Breloy L. and Ximenis M.
Electrophilic substitution in poly(ethylene terephthalate) waste for upcycling to functional metal-organic frameworks
Bryankin D., Ivanov A., Soldatova N.S., Yusubov M., Naghdi S., Eder D., Valtiner M., Sardon H., Postnikov P.S. and Guselnikova O.
High Charge Carrier Mobility in Non-Conjugated 3D Covalent Organic Frameworks
J. Almarza, K. Strutynski, S. Fu, N. M Padial, C. Martí-Gastaldo, A. N. Khlobystov, M. Bonn, H. Wang, M. Melle-Franco and A. Mateo-Alonso
Toward Safer and Sustainable Lithium Metal Batteries: Fluorine-Free Solid Polymer Electrolytes
D. Fraile-Insagurbe, L. Meabe, B. Fortuin, I. Segura-Laparra, E. Sasieta-Barrutia, R. Cid Barreno, J. Carrasco, W. Wieczorek, M. Forsyth, M. Armand and M. Martínez-Ibáñez
Photoswitchable isomers to improve grain boundary resilience and perovskite solar cells stability under light cycling (Feb, 10.1038/s41560-026-01993-z, 2026)
Z. Zhang, R. Zhu, G. Li, Y. Tang, H. Wu, J. Zhao, J. Wu, T. Gries, A. Musiienko, S. Zuo, Z. Li, B. He, Z. Su, X. Gao, W. Zuo, B. Hou, J. Pascual, L. Sapienza, L. Wang, L. Deng, Y. Jia, G. Li, P. Dyson, M. Nazeeruddin, M. Saliba, A. Abate and M. Li
Systematic multi-nanoparticle screening for long-term colloidal stability and oil recovery enhancement under harsh reservoir conditions
Hashemi M., Tamsilian Y. and Kord S.
Polymer particles as dispersants for inorganic pigments in waterborne paint formulations
S. Beldarrain, V. Vreeken, J.R. Leiza and E. Gonzalez
Tailoring Light Management in All-Perovskite Tandem Solar Cells: The Impact of Nanotextures
Berwig S., Yun Y., Im D., Taupitz I., Cruz A., Härtel M., Li B., Prince K.J., Winarto H., Gries T.W., Jäger K., Riesebeck F., Mantione D., Monaci S., Mariotti S., Vijayakumar V., Janssen R.A.J., Lee S., Stannowski B., Becker C., Tockhorn P. and Albrecht S.
Correlated Polymer-Proton Hopping Enables Water-Independent Fast Proton Transport in Poly(Ionic Liquid) Membranes
Smith K., Gallastegui A., Yu Z., Pairetti Y., Seel A., Ollivier J., Sakai V.G., Schroeder B.C., Forsyth M., Gueguen A., Mecerreyes D. and Foglia F.
How Polymer Chains Remember Their Crystalline Past: Simulations Uncover the Molecular Origin of Melt Memory
A. De Nicola, A.J. Müller, D. Cavallo and G. Milano
Iterative Synthesis of Pyrene-Coronene Molecular Graphene Nanoribbons
Medel M.A., Wen G., Morón-Blanco A., Bonn M., Wang H.I., Melle-Franco M. and Mateo-Alonso A.
Towards the multiscale design of pressure sensitive adhesives
N. Moreno, E. Zohravi, S. Hamzehlou, E. Patiño-Nariño, M. Raj, M. Fernandez, N. Ballard, J. Asua and M. Ellero
Introduction to the virtual special issue: Polymeric materials meet technological challenges at POLY-CHAR 2025
Bhaw-Luximon A., Flores A. and A.J. Müller
High-Molecular-Weight Isodimorphic Copolyesters with Tunable Ductility, Barrier Performance, and Adhesive Behavior
Torres-Rodríguez J., Pérez-Camargo R.A., Vidal F., Mantione D., Martínez de Ilarduya A., Aranburu N., Otaegi I., Calafel M.I., Fernandez M., Alam M.S., Sangroniz A., Sardon H. and A.J. Müller
A Mechanistic Study of the Influence of Oxygen on Free Radical Polymerization of Butyl Acrylate, Vinyl Acetate and Methyl Methacrylate
A. Sladojevic, S. Hamzehlou, N. Ballard and J.R. Leiza
Exploring the Strengths and Limitations of Polymer Chemistry Informed Neural Networks
S. Hamzehlou, N. Ballard and J. Asua
Towards selective recycling technologies for complex plastic waste
M. Ximenis, C. Jehanno, L. Breloy, O. Akin, R. Kol, K. Van Geem, S. De Meester and H. Sardón
Stringimeter: an open source, cost-effective and versatile device for probing complex fluids in uniaxial extensional flow
Calabrese V.
Engineering biocompatible poly(D,L-lactide-co-caprolactone) (PDLCL) copolymers as neural scaffolds with attenuated neuroimmune response
I. Alayeto, J.R. Sarasua, A. Larranaga, E. Meaurio and A. Lejardi
Metabolic reprogramming of classically activated microglia by surface-functionalized enzymatic nanoreactors-SEMIT
Y. Amassoka, A. Larranaga and A. Beloqui
From rupture to regeneration: bioengineering anisotropic tendon replacements
A. Llucia and S. Camarero-Espinosa
3D-bioprinted breast tumour with embedded plasmonic biosensors for spatially resolved drug screening
L. Afonso, P. Vazquez-Aristizabal, G. Vinnacombe-Willson, Y. Henriquez-Banegas, P. Gonzalez-Callejo, P. Valera-Sapena, M. Henriksen-Lacey, C. Garcia-Astrain and L. Liz-Marzan
4D-printed thermoresponsive plasmonic scaffolds recapitulating alveolar dynamics for in vitro lung modeling
A. Urigoitia-Asua, I. Villaluenga and D. De Aberasturi
Monitoring approaches for 3D bioprinted cell models: integrating biosensors to track pathology
C. Garcia-Astrain, A. Munoz-Mateo, F. Perin and L. Troncoso-Afonso
A fully integrated hiPSC-derived 3D blood-brain barrier-on-chip model
B. Passos, M. Lefevre, M. Ceccarelli, K. Krukiewicz, A. Larranaga, M. Battaglini and G. Ciofani
Synthesis and Characterization of Zn-Doped Fe3O4 Nanoparticles for Magnetic Hyperthermia: In Vitro Test Against Thermoresistant Pseudomonas aeruginosa and Candida albicans
F. Franyutti-Villegas, U. Salazar-Kuri, J. Salinas-Hernandez, R. Manzano-Villanueva, N. Rojas-Ruiz, N. Martha-Aguilar, M. Lopez-Merino and M. Mendez-Rojas
Quantum-Chemical Study for Understanding the Low Incorporationof 2-Methylen-1,3-Dioxepane (MDO) in Radical Ring-Opening Copolymerizationwith Vinyl Monomers
M. Irigoyen, A. Marchand, X. de Pariza, T. Melchin, A. Barquero, J. Matxain, H. Sardon, J.R. Leiza and F. Ruiperez
Understanding the Crystallization of Random Copolymers beyond Iso(di)morphism and Comonomer Exclusion
K. Wang, H. Ding, R. Chen, M. Zhang, Y. Jia, Y. Wang, Y. Shi, R. Perez-Camargo, X. Zhu and A.J. Müller
Continuous and Divergent Biotransformation of ß-Ketoesters Into Enantiomerically Pure ß-Hydroxyacids or Their Oligomers Through a Telescoped Multienzyme Cascade
Pota G., Andrés-Sanz D., Maiz-Iginitz A., Armendáriz-Ruiz M.A., Sardon H., Vitiello G., Califano V., Costantini A. and López-Gallego F.
Hydrogen-bond networks and proton transfer in choline geranate: insights from IR spectroscopy
Loizate M., Khanh Lê T.N., Picchio M.L., Zubeltzu J., Formoso E., Frömbgen T., Kirchner B., Tassaing T. and Rezabal E.
Engineering bio-based eutectogels from casein via 3D printing
Locatelli S., Luque G.C., Ronco L.I., Varela O., de Pariza X.L., Mecerreyes D. and Minari R.J.
Predictive modeling of seeded semi-batch emulsion polymerization of n-butyl acrylate using polymer chemistry-informed neural networks
Hamzehlou S., Farajzadehahary K., Larrañaga J., Ballard N. and J. Asua
Unique Hierarchical Mesostructures Arising from Biobased Double-Crystalline PLLA-b-PHDO-b-PLLA ABA Triblock Copolymers
F. Kilens, L. Fonseca, A. Olazabal, L. Unanue, J. Olmedo-Martinez, M. Krol, D. Mantione, N. Reis, A. Dove, H. Sardon, A.J. Müller and C. Jehanno
Body surface potential mapping of the cortico-muscular axis using smart textile electrode arrays
Serrano R.R.-M., Brunt C., Tao X., Zajaczkowski M., Dominguez-Alfaro A., Picchio M.L., Mantione D., Drakakis E.M., Mecerreyes D. and Malliaras G.G.
Anion-Regulated Ionic Liquid-Polymer Electrolytes for High-Performance and Safe Lithium Metal Batteries
K. Huang, L. Yan, H. Xu, L. Wu, Z. Li, J. Jiang, X. Cao, D. Mecerreyes, G. Qin and X. Zhang
Anti-fouling properties of an ionic liquid/poly(ionic liquid) gelled electrolyte for the electrochemical detection of bisphenol A
E. Gorenskaia, S. Uzice, M. Jalali, R. Fuller, D. Mecerreyes and D. Silvester
Conformal Metallosaccharide Hybrid Films for Protecting Wood Surfaces From Environmental Damage
Wang W., Fernandez A.S., Botta G., Modin E., Jankovic I.Š., Ji S., Liu J. and Knez M.
Polymer Nanoparticles as Functional Fillers for Composite Electrolytes for Batteries
Herranz Berzosa A., Lingua G., Unanue L., A.J. Müller, Forsyth M., J.R. Leiza and Mecerreyes D.
NMR spectroscopy for resolving the structure and reactivity of metal halide perovskite solutions
Pascual J.
From Green Extraction to Gut Bioaccessibility: Synergistic Potential of Ginkgo biloba, Astragalus membranaceus, and Salvia miltiorrhiza Phytochemicals for Functional Food Applications
Younis M.I., Sallam Y.I., Mahmoud K.F., Tlay R.H., Aboudzadeh M.A. and Abedelmaksoud T.G.
Extraordinary Longevity of Flow-Induced Crystallization Precursors in Isotactic Polypropylene
H. Khabbaz, E. Perret, A.J. Müller, K. Ragaert and A. Gooneie
How the lack of chain ends affects the melt memory of poly(ethylene oxide): cyclic versus linear chains
Sangroniz L., Barroso-Bujans F., Allgaier J. and A.J. Müller
Dynamic exchange in vinylogous urethane vitrimers: computational and experimental approaches to screen structure-property relationships of dynamic bonds
Teotonico J., Ruipérez F. and Ballard N.
Effect of polyacrylic binder solution pH on silicon electrode performance
K. Jagodzinski, A. Fernandez, A. Santiago, N. Casado and N. Boaretto
Mixed ionic-electronic conducting eutectic soft materials for bioelectronics
M. Firuzeh, E. Giuzio, A. Larranaga and M. Picchio
Recent advances in VAT photopolymerization additive manufacturing of battery electrodes: towards high-resolution 3D-printed batteries
Lashkari S., Dominguez-Alfaro A. and Mecerreyes D.
A Negatively Curved Pyrene-Fused Azaacene
Carini M., Martín-Arroyo M., Melle-Franco M. and Mateo-Alonso A.
3D printable polybutylene-succinate-co-adipate/carbon nanotube conductive nanocomposites: Effect of shearing on electrical conductivity
Pascal A., Iruretagoyena E., Calafel M.I., Fernández M., Guerrica-Echevarria G., Aranburu N. and Aguirresarobe R.
Biodegradable Poly(dodecane succinate-ran-caprolactone) nanoparticles with isodimorphic behavior for sustained release of CPT-11 in triple negative breast cancer
Cillari R., Torres-Rodríguez J., Scirè S., Pérez-Camargo R., Roscigno G., A.J. Müller and Mauro N.
Hierarchical tuning of viscoelasticity in tetra-PEG hydrogels via Au(I)-thiolate coordination
Insua I., Aguirresarobe R., de Souza Nunes J., Dupin D., Acera A., Calafel I. and Fernandez M.
Low-fluorine ionomers in catalyst layers: Toward PFSA-reduced PEM fuel cells
Makhlooghiazad F., Hirth L., Gierse S., Gallastegui A., Casado N., Kiaee Z. and Zamel N.
Unveiling the chemical composition of a microbiota-derived extracellular polymeric substance and its antivirulence potential against Staphylococcus aureus from bovine mastitis
M. de Lillo, M. Orellano, M. Breser, L. Bohl, G. Tiraboschi, M. Calderón, C. Porporatto and P. Isaac
Towards online control of molar mass distributions of non-linear polymers in emulsion polymerization using reinforcement learning
K. Farajzadehahary, S. Hamzehlou, N. Ballard and J. Asua
Direct Gravity-Induced Modulation of Cardiac Conduction Pathways Evidenced Through Propagation Features in Electrophysiological Mapping
R. Serrano, M. Picchio, D. Mantione, D. Mecerreyes and G. Malliaras
3D Printed PEDOT:PSS-Based Lattice Pressure Sensors With Tunable Electromechanical Response
O. Karakaya, N. Lopez-Larrea, A. Tunc, M. Rincon-Iglesias, K. Chen, K. Nau, S. Lanceros-Mendez, D. Mecerreyes, M. Criado-Gonzalez and G. Hernandez-Sosa
Development of flame-retardant waterborne alkyd resins for wood coating
M. Puyadena, I. Etxeberria, G. Ortega, A. Mugica, E. Matxinandiarena, L. Martin, A. Barrio, A. Gonzalez and L. Irusta
Bioinspired catechol-based photocurable tissue sealants
López-Moral A., Moreno-Villaécija M.Á., Suárez-García S., Bolaños-Cardet J., Sedó-Vegara J., Alibés R., Mancebo-Aracil J., Sardon H., Lee H., Roscini C., Sangermano M., Busqué F. and Ruiz-Molina D.
Injectable and viscoelastic click alginate hydrogels for spatio-temporal T cell administration in vivo
Berasain J., Manzano S., Mitxelena-Iribarren O., Heras U., Romo-Valera A., Azcoaga P., Iturriaga L., Egia-Mendikute L., Palazón A., Fernández M., Caffarel M.M., Aguirresarobe R. and Cipitria A.
Engineering biocompatible chitosan hydrogels with polyether-based crosslinkers for biomedical applications
N. Politakos, C. Busatto, M. Orellano, S. Martin-Colomo, A. Larranaga, D. Estenoz and M. Calderon
Novel printing strategy for high fidelity extrusion-based bioprinted multi-material nested models
M. Zelaia Amilibia, U. Aizarna-Lopetegui, L. Perez Sanchez, M. Henriksen-Lacey, G. Berasategi Onatibia, C. Garcia-Astrain, D. Mejia-Parra, C. Cortes and D. Jimenez de Aberasturi
Systematic Investigation of Classical Molecular Dynamics Models for Ionic Liquid-Based Electrolytes at Electrode Interfaces
S. Ravindranath, J. Soto Puelles, A. Padua, M. Forsyth and F. Chen
When Copper Gets Together: Colloidal Cooperation in Oxygen Activation
L. Kunytska, A. Dobrovolska, I. Kurowska, O. Coutelier, M. Destarac, N. Viguerie and J. Marty
Programming Photocatalytic Reactivity in Quinoline-Based Covalent Triazine Frameworks
M. Sanchez-Fuente, E. Musa, X. Solans-Monfort, A. Moya, K. Stylianou and R. Mas-Balleste
Microglia encapsulation in nanozyme-loaded hydrogels: response to oxidative stress and inflammation
Martín-Colomo S., Ontoria A., Tapeinos C., Beloqui A., Pineda J.R. and Larrañaga A.
Towards the detection of 2,4,6-trinitrotoluene with ionic liquid/poly(ionic liquid) membranes
C. Hay, E. Gorenskaia, J. Phillips, A. Butterfield, D. Mecerreyes and D. Silvester
Electroactive dopamine-functionalized reduced graphene oxide/alginate hydrogel containing thymol/chitosan nanoparticles for advanced antibacterial and bioadhesive wound dressings
P. Nezhad-Mokhtari, E. Kashani, M. Mazloomi, M. Ghahremani-Nasab, I. Ahadzadeh, A. Del Bakhshayesh and H. Hamishehkar
Polylactide, Polycaprolactone, and Rice Husk-Biocomposites for Biomedical and Packaging Applications
A. Amin, X. Larranaga, A. Mohamed, S. Metwally, M. Sultan, S. Loutfy, E. Nashy and M. Abdel Raouf
Catalyst-Controlled Dual Dynamic Networks in Polyhydroxyurethanes from Six-Membered Cyclic Carbonates (vol 227, e00498, 2026)
P. Bron, N. Arnould, L. Soares, D. Wolosz, A. Gonzalez, L. Irusta, H. Sardon, S. Caillol, V. Ladmiral and C. Bakkali-Hassani
Polyampholyte Copolymers Based on Dual Ionic Monomers as Self-Healing Aqueous Binders for Lithium Ion Battery Cathodes
López de Lacalle J., Rolandi A.C., Olmedo-Martínez J.L., Criado-Gonzalez M., García-Suárez E.J., Casado N. and Mecerreyes D.
Crystallization-Driven Quadrant-Specific Spherulitic Self-Assembly in Partially Miscible Biodegradable PBS/PCL/PBS-ran-PCL Blends
M. Safari, R. Kneepkens, R. Perez-Camargo, A. Mugica, M. Zubitur, M. Burghammer, G. Liu, D. Wang, J. Harings and A.J. Müller
Influence of Coalescing Aids on Hardness Development and Water Resistance of Alkali-Soluble Resin-Stabilized Latex Films
W. Tangsongcharoen and M. Paulis
Phosphonium Poly(Ionic Liquid) Electrolytes for Fast Lithium-Ion Conduction
A. Herranz Berzosa, K. Cai, G. Lingua, D. Mantione, I. Santos, F. Santino, M. Forsyth, F. Chen and D. Mecerreyes
Non-isocyanate polyurethane foams: where we stand and what comes next?
Grignard B., Bourguignon M., Monie F., Vidil T., Cramail H., Perli G., Sardon H., Raquez J.-M., Caillol S. and Detrembleur C.
Mechanistic Insights into Transfer-Dominated Branching Radical Telomerization through Kinetic Monte Carlo Simulation
O. Lamarins, S. Hamzehlou and N. Ballard
Interfacial Degradation Mechanisms between Li Metal and a Li3InCl6 Hybrid Electrolyte in the Presence of a Poly(ethylene oxide) Electrolyte Interlayer
Boulmier T., Stankiewicz N., Campéon B.D.L., Zrikem K., Lavernot-Cointeaux L., Daher N., Modin E., Panagiotopoulos A., Iojoiu C., Villaluenga I. and Devaux D.
From isodimorphism to total exclusion: composition-dependent mixed crystallization in poly (propylene adipate-ran-butylene adipate) copolyesters
Pérez-Camargo R.A.
Dry Ionic Soft Materials from Zwitterionic Polymerizable Eutectic Solvents
Mercadal P.A., Zoratti M., Tommasone G., Romero M.R., Picchio M.L. and González A.
Harnessing Supramolecular J-Aggregates in Deep Eutectic Solvents for Tunable NIR Photothermal and Photodynamic Therapy
Kumar K., Gurol M., Sanjarnia P., Orellano M.S., Beloqui A., Ebo L., Picchio M.L. and Calderón M.
Photophysical reappraisal of additives for photovoltaic systems: a case study on three hole transporting materials and two dopants
S. Ramirez-Barroso, J. Marco-Guimbao, D. Garcia-Fresnadillo, N. Martin and J.L. DELGADO
PEDOT-Based Eutectogel Electrode Arrays for Enhanced High-Resolution Electrogastrography: Fabrication, Stability, and Wearable Performance
C. Slaughter, L. Gatecliff, X. Tao, R. Ruiz-Mateos Serrano, A. Jin, M. Picchio, D. Mantione, A. Dominguez-Alfaro and G. Malliaras
Stabilizing Grain Boundary Grooves in p-i-n Perovskite Solar Cells via Dual-Site Locking Riveting
Y. Niu, Z. Zhang, C. Zhang, J. Pascual, W. Zuo, Y. Tang, H. Wu, Z. Su, M. Aldamasy, R. Zhu and M. Li
Fluorescent Supramolecular Gels Based on D-Sorbitol Derivatives
E. Odella, M. Criado-Gonzalez, R. Ponzio, D. Mecerreyes, M. Picchio and D. Mantione
Revisiting fluid flow regimes in porous media: Influence of surface roughness on fluid flow displacement
Shirazi M., Mahani H., Tamsilian Y. and Masihi M.
UV-curable non-isocyanate polyurethane/acrylate (NIPUA) hybrid coatings via transurethanization: A sustainable approach
Razquin I., Hidalgo-Gallardo I., Balda-Intxaurraga H., Martin L., Otaegi I., Irusta L. and González A.
A Polyaniline-SDS Based Flexible Sensor for Glyphosate Detection in Aqueous Media
Milic L., Simi M., Tomovska R., Blazevska-Gilev J. and Stojanovic G.M.
From dispersion to powder: Monitoring PMMA latex coagulation with Photon density Wave Spectroscopy (PDWS)
González-González S. and Aguirre M.
Ionic liquids for electrochemical technologies
H. Zhang, S. Passerini, M. Forsyth and M. Armand
Unravelling the Intrinsic Reactivity and Colloidal Instability in Tin-Based Halide Perovskite Precursor Solutions
J. Pascual, M. Flatken, E. Radicchi, M. Aldamasy, S. Hu, O. Solis, S. Turren-cruz, G. Li, A. Hoell, S. Schorr, M. Li, F. De Angelis, A. Musiienko, A. Dallmann and A. Abate
Tailoring the Properties of Ethyl Cellulose Membranes Using Hydrophobic Deep Eutectic Solvents
B. Alke, E. Gabirondo, V. Alves, J. Crespo, C. Brazinha and L. Tome
Gold Nanorods as Effective Modulators of Shape Memory Behavior in Physiological Conditions of PLA/PEG Blends
X. Larranaga, S. Bittinger, U. Aizarna-Lopetegui, R. Schonlein, B. Rodriguez, J.R. Sarasua, E. Zuza and D. Jimenez de Aberasturi
Degradable Water-Swellable Elastomers from Biobased Deep Eutectic Monomers
L. Navarro, M. Hartman, S. Locatelli, S. Vaillard, M. Picchio, R. Minari, H. Sardon and D. Mecerreyes
Synthesis and Properties of Poly(ethylene dodecanedioate)/Poly(dimethylsiloxane) and Poly(butylene dodecanedioate)/Poly(dimethylsiloxane) Copolymers: Synergistically Enhanced Mechanical Properties, Hydrophobicity, and Antifouling Performance
L. Huang, H. Sardon, G. Cao, X. Wang, W. Zhen and L. Zheng
An insight into the monomeric isomerism in the polymerization of glycidol with B(C6F5)3: A DFT study of the initiation, propagation and cyclization steps
X. Gastearena, F. Ruipérez, F. Barroso-Bujans, A. Lam and J. Matxain
Comprehensive Lithium Polysulfide Diffusion Insights within Solid-State Electrolytes
M. Ramos, O. Pajuelo-Corral, N. Goujon, D. Devaux and I. Villaluenga
4D-Printable Poly(Thio)urethane Photoresins With Reactive Oxygen Species Responsiveness and Anti-Inflammatory Functionality
X. Lopez de Pariza, L. Arevalo-Lagos, L. Breloy, O. Varela, A. Larranaga, J. Cadavid-Vargas, O. Garagarza-Goienetxea, M. Moya-Granados, V. Bagnarello, H. Sardon and M. Criado-Gonzalez
Third-generation solar cells: The next qualitative leap in photovoltaics
S. Erten-Ela and J.L. DELGADO
Poly(l-lactic acid)/alkali lignin composites: properties, biocompatibility, cytotoxicity and antimicrobial behavior (vol 56, pg 13785, 2021)
A. Bužarovska, J. Blazevska-Gilev, B. Pérez-Martnez, L. Balahura, G. Pircalabioru, S. Dinescu and M. Costache
Photoswitchable isomers to improve grain boundary resilience and perovskite solar cells stability under light cycling
Z. Zhang, R. Zhu, G. Li, Y. Tang, H. Wu, J. Zhao, J. Wu, T. Gries, A. Musiienko, S. Zuo, Z. Li, B. He, Z. Su, X. Gao, W. Zuo, B. Hou, J. Pascual, L. Sapienza, L. Wang, L. Deng, Y. Jia, G. Li, P. Dyson, M. Nazeeruddin, M. Saliba, A. Abate and M. Li
Tailored ZIF-8 morphologies enable efficient chemical recycling of polycarbonate waste
P. Jutrzenka Trzebiatowska, M. Baluk, I. Olazabal, M. Gazda, G. Perli, H. Sardon, M. Giménez-Marqués and A. Zaleska-Medynska
Tacticity-independent crystallization of polymers
L. Sangroniz, A. Sangroniz, C. Shi, M. Scoti, M. Ximenis, C. De Rosa, E. Chen, H. Sardon and A.J. Müller
Sulfonated Hyaluronic Acid-Based Polymers and Hydrogels Using Thiol-Ene and Thiol-Michael Reactions
Beeren I.A.O., Dijkstra P.J., Sanchez A.A., Ramis J., Perin F., Mota C., Camarero-Espinosa S., Moroni L. and Baker M.B.
Per and Polyfluoroalkyl Substances-Free Poly(ionic liquid) Reinforced with Cellulose Nanofibrils as Sustainable Electrolyte for High-Voltage Solid-State Lithium Batteries
Villacis-Segovia C., Lizundia E., Vattappara K., Grande H.-J., Kvasha A. and Villaluenga I.
Additive Manufacturing and Characterization of Polystyrene for Thermal Insulation Applications
Cimino A.T., Miranda A., Casella M., Hashemi T., Salomone R., Milella E., Pantani R. and Liparoti S.
Chitosan- and Gelatin-Based Composite Granular Hydrogels for Cartilage Tissue Regeneration
N. Khatami, P. Guerrero, K. de la Caba, A. Abarrategi and S. Camarero-Espinosa
Emergent Interpolymer Interactions in Flowing Polymer Solutions
V. Calabrese
Mitigating Magnesium Reactivity in CeO2-Containing Waterborne Coatings Through ZrCC and LDH Surface Pre-Treatments
J. Gomez-Granados, M. Paulis, M. Mohedano, R. Arrabal, J.R. Leiza and J. Vega
Photobase generators for amino acid N-carboxyanhydride ring-opening photopolymerization: rapid access to degradable polypeptide-based networks
R. Murphy, C. Gonzato, F. Vidal, O. Varela, H. Sardón, O. Soppera and A. Heise
Different Crystalline Populations for Biopolyesters within Graphene-Based Nanopapers
H. Zhao, R. Pérez-Camargo, Y. Li, Z. Li, G. Liu, A.J. Müller and A. Fina
Microfluidic Fabrication of TiO2-Hydrogel Photocatalytic Composites for Water Treatment
S. Penas-Nunez, D. Lecumberri, A. Duran and F. Penas
Tailoring the glassy phase in polymer semiconductors tunes their optical properties
Ramos N., Asatryan J., Di Lisio V., Campoy-Quiles M., Martin J. and Cangialosi D.
Topography as a cue for driving osteochondral unit regeneration
S. Ramos-Díez and S. Camarero-Espinosa
Rheology as promising tool to determine ion-transport and electrochemical performance of block copolymer electrolytes
M. Airoldi, M. Fernandez and I. Villaluenga
Rational Design of Lithium Sulphonamide Polymeric Cation Exchange Membranes for LiOH Production by Electro-Electrodialysis
M. Amores, A. Gallastegui, E. Gabirondo, L. O’Dell, K. Ang, A. Nikoloski, D. Mecerreyes, R. Kerr and C. Pozo-Gonzalo
Optimizing and Predicting Toxicity of Oxaliplatin-Loaded Nanocomposites Using Machine-Learning and Physics-Informed Approaches
A. Rahdar, S. Fathi-karkan and M. Aboudzadeh
Tailoring piezoelectric response in stereocomplexed polylactide systems through nanoparticle incorporation and microstructure control
Raef M., Panfilo A., Larrañaga A., Azkune M., González A., Etxeberria A. and M. Ugartemendia J.
Iron-Based Lewis/Brønsted Deep Eutectic Solvents for the Hydrolysis of Nylon-6,6
Rollo M., Rastelli F., Ximenis M., Martinelli E., Ciancaleoni G. and Sardon H.
Biodegradable Pectin-Based Films with Ternary Natural Eutectic Solvents for Enhanced Mechanical, Antioxidant, and Antimicrobial Properties
M. Zoratti, P. Mercadal, P. Gimenez, M. Picchio and A. González
Waterborne Biodegradable Polyesters Based on Thiol-Ene Chemistry for Paper Coating Applications
M. Naderi, S. Beldarrain, M. Paulis and J.R. Leiza
Novel Applications of Successive Self-nucleation and Annealing Thermal Fractionation for Polymer Characterization
R. Pérez-Camargo and A.J. Müller
Engineering the interface of cellulose nanocrystals for transient and bioactive iontronics based on protein eutectogels
S. Carrasco-Saavedra, L. Jimenez-Ortega, R. Rojas-Alvarez, B. Millan-Chiu, G. Fonseca-Hernandez, P. Alcantara-Llanas, K. Sanchez-Carrillo, F. Flores-Ruiz, J. Heredia, M. Picchio and J. Mota-Morales
Effects of Carbon Fillers on Electrical and Mechanical Properties of Water-Based Polymer Nanocomposites
M. Ehsani, M. Prosheva, K. Heise, J. Gilev, R. Tomovska and Y. Joseph
Stiff Yet Elastic Thermoplastic Polyurethanes Based on Nanoconfined Stereocomplexation in PLA Interphases
R. Xu, X. Miao, S. Yang, S. Wang, Y. Ma, A.J. Müller and Z. Li
Enzyme biocatalyst for removal of residual monomer fractions in waterborne polymers
A. Trajcheva, C. Gkountela, J. Elgoyhen, O. Sanz, S. Vouyiouka and R. Tomovska
The dual role of borohydride salts in enhancing perovskite solar cell performance and stability
T. Diaz-Perez, C. Pareja-Rivera, J. Pascual, S. Hector Juarez, S. Masi, E. Barea, S. Turren-Cruz and I. Mora-Sero
Revisiting the Mechanism of Radical Entry in Emulsion Polymerization
J. Hincapié, D. Otaegui, Z. Zeng, B. Reck, N. Ballard and J. Asua
How chain stereoconfiguration and molecular weight influence Poly(propylene oxide) crystallization
J. Torres-Rodriguez, C. Fornaciari, R. Perez-Camargo, A. Mugica, M. Zubitur, G. Preda, D. Pasini, O. Coulembier and A.J. Müller
Colloidal rod dynamics under large amplitude oscillatory extensional flow
S. Recktenwald, V. Calabrese, A. Shen, G. Natale and S. Haward
Waterborne Random Copolymers as Polymeric Surfactants for Emulsion Polymerization
A. Barquero, M. Aguirre and J. Scheerder
Artificial Intelligence-Assisted Design of Nanomedicines for Breast Cancer Diagnosis and Therapy: Advances, Challenges, and Future Directions (vol 15, 354, 2025)
M. Shirzad, M. Shaban, V. Mohammadzadeh, A. Rahdar, S. Fathi-karkan, Z. Hoseini, M. Najafi, Z. Kharaba and M. Aboudzadeh
Polymer-metal oxide interfaces in XHNBR/PA6 blends: computational insights toward sustainable crosslinking
U. Calvo, J. Matxain, J. Egurrola, A. Burgoa and F. Ruipérez
The introduction of long-chain branches within linear semicrystalline polymers enhances overall crystallization by promoting homogeneous nucleation
R. Perez-Camargo and A.J. Müller
Process Control by Optical Emission Spectroscopy During Reactive Magnetron Sputtering of NiVxOy Electrochromic Coatings
O. Hernandez-Rodriguez, G. Guzman, R. Ortiz, E. Zuza, V. Bellido-Gonzalez, I. Quintana and E. Gutierrez-Berasategui
Emulsion Polymerization: A Challenging Battleground for Polymer Reaction Engineering
J. Asua
3D heterotypic models of glioblastoma reveal the impact of microglia on cellular organization and the production of a distinct secretome
C. García-Sáez, J. Alonso-Marañón, M. García-Puga, A. Rubio-Zulaika, I. de Goñi-Garcia, L. Blázquez and S. Camarero-Espinosa
Catalyst-Controlled Dual Dynamic Networks in Polyhydroxyurethanes from Six-Membered Cyclic Carbonates
P. Bron, N. Arnould, L. Soares, D. Wolosz, A. Gonzàles, L. Irusta, H. Sardon, S. Caillol, V. Ladmiral and C. Bakkali-Hassani
Ring-opening metathesis polymerization-Derived Organoborane Polymers as Strong Lewis Acids and Luminescent Materials
J. McQuade, F. Vidal, M. Noor, L. Anand, R. Lalancette and F. Jakle
Thiol-Functionalized TiO2 as Reactive Nanoadsorbents for Residual Monomer Removal from Waterborne Polymer Dispersions
A. Trajcheva, P. Morales, J. Elgoyhen and R. Tomovska
Operando Synchrotron-Based Fourier Transform Infrared Microspectroscopy of Metal-Ion Organic Battery Materials
A. Black, D. Tchitchekova, N. Patil, N. Goujon, D. Mecerreyes, R. Marcilla, I. Yousef and A. Ponrouch
Polymorphic Self-Poisoning in the Isothermal Crystallization of Thermoplastic Polyurethanes
Z. Baouch, I. Guardincerri, K. Jariyavidyanont, L. Sangroniz, Y. Shi, E. Poselt, A.J. Müller, R. Androsch and D. Cavallo
Thiols as depletion agents for elimination of residual monomers from waterborne polymer latex
A. Trajcheva, J. Elgoyhen, A. Agirre and R. Tomovska
3D (Bio)printed In Vitro Infection Models: Tools to Investigate Host-Pathogen Interactions and Accelerate the Discovery of Therapies
A. Mateo, L. Troncoso-Afonso, F. Perin and C. Garcia-Astrain
Harnessing Particle Size Segregation To Tune Molecular Additive Distribution in Coatings
H. Le, T. Murdoch, A. Barquero, R. Tomovska and I. Martin-Fabiani
Surface functionalization of multilayer nanoparticles with hyaluronic acid or alternative polymers: Effects on cellular uptake and re-epithelialization in a human ex vivo wound model
M. Motta, U. Semenko, U. Goswami, Z. Zhao, F. Rancan, A. Larranaga and M. Calderdon
Understanding Enhanced Melt Memory in Poly(Octamethylene Carbonate)-Based Random Copolycarbonates with Mixed Isodimorphic/Isomorphic Crystallization
Y. Liao, R. Perez-Camargo, J. Maiz and A.J. Müller
Ionic Liquids Electrolytes for High Performance Sodium Batteries-Chemistry, Composition, and Interfaces
F. Makhlooghiazad, L. Huang, N. Byrne, P. Howlett and M. Forsyth
Piezoelectric polylactic acid-based biomaterials: Fundamentals, challenges and opportunities in medical device design
R. Schonlein, P. Bhattarai, M. Raef, X. Larranaga, A. Poudel, M. Biggs, R. Aguirresarobe and J. Ugartemendia
Pt-VS2-MXene nanozyme for on-site pesticide and H2O2 sensing: Bridging computational insights and experiment
J. Ahn, A. Mohammadi, K. Kumar, M. Pachin, S. Tamang, Y. Xu, R. Maleki, A. Vilian, Y. Huh and Y. Han
Integrating machine-learning and nanotechnology: imatinib-loaded nanomicelles for targeted therapy in MCF-7 breast cancer
A. Rahdar, S. Fathi Karkan, M. Javid-Naderi and M. Aboudzadeh
Improving the properties of carbonated soybean oil-based non-isocyanate polyhydroxyurethane networks: Copolymerization versus hybridization with epoxy resin
N. Martin-Larrañaga, I. Razquin, N. Aramburu, O. Sanz, A. González and L. Irusta
Biocompatibility and immunomodulation of MXenes for targeted delivery of bioactive agents and drugs
M. Ramezani Farani, D. Mirzaee, A. Hatami, K. Kumar, S. Ghoreishian and Y. Huh
Improvement of electronic structure, optical properties, and crystalline quality of FAPbI3 perovskite thin films by poly(ionic liquid) additives based on polymerized TFSI ion
V. Rajic, B. Ramadani, N. Latas, M. Milovic, R. Rai, D. Mantione and M. Ivanovic
Solvent switch strategy to facilitate the downstream process of chemical recycling of plastics
E. Luna, I. Olazabal, T. de Somer, P. Nachtergaele, X. López, M. Ximenis, S. de Meester and H. Sardón
Ammonium Salts as Curing Agents to Obtain Ionic Epoxy Resins With a Thermoplastic-to-Thermoset Transition
I. Kurowska, L. Unanue, I. Calafel, D. Otaegui, J. Olmedo-Martínez, L. Irusta, D. Vinagre, N. Aramburu, N. Casado, I. Odriozola and D. Mecerreyes
Self-nucleation enhances the stability of the polymorphs present in triple polymorphic polythioethers
L. Unanue, J. Olmedo-Martínez, C. Le, A. Chemtob and A.J. Müller
Circular bioeconomy in packaging: Banana by-products as multifunctional food packaging film components
B. Liu, Q., D. Merino, P. Ezati, A. Pandi, G. Göksen, M. Tosif, W. Zhang and G. Xia
Sustainable Structural Hot-Melt Adhesives Enabled by Functionalized Crystalline Lamellae
Z. Hu, A. Wolff, Y. Zhao, E. Rettner, M. Alam, A. Sangroniz and G. Miyake
Manganese Oxide as an Electrochemical Sensor for Carbamazepine and Sulfamethoxazole in Wastewater Samples
P. Mokaba, C. Nepfumbada, B. Mathe, A. Larrañaga, N. Hlongwa and U. Feleni
DUAL ROLE OF LIGNIN IN WATERBORNE POLYMER COMPOSITES: REINFORCEMENT AND STIMULI-TRIGGERED DEGRADATION
M. Proseva, A. Petanova, R. Tomovska and J. Gilev
Nanopatterned bioresorbable elastomeric scaffolds to promote neural, glial, and endothelial differentiation using human embryonic and induced pluripotent stem cells
I. Romayor, S. Martín-Colomo, Y. Polo, C. Bello, R. Basanta-Torres, I. Manero-Roig, B. Pardo-Rodríguez, J. Luzuriaga, F. Unda, J.R. Sarasua, G. Ibarretxe, A. Larrañaga, C. Eguizabal and J. Pineda
Topochemical Reaction Induces Anisotropy, Decreasing Solid-State Thermal Conductivity
A. Atassi, S. Makarem, J. Ponder, A. Balzer, J. Rinehart, S. Gregory, V. Pirela, J. Martín, P. Hopkins, N. Stingelin and S. Yee
First step toward recycling end-of-life permanent magnets: a-Fe micrometer-sized particles mixed with polypropylene as a model for NdFeB plastic composites
A. Ghosh, L. Roué, C. Levarlet, L. Zaida, A. Omelyanchik, Y. Snoussi, N. Challab, S. Slimani, E. Matxinandiarena, G. Varvaro, A.J. Müller, D. Peddis, S. Barboura and S. Ammar-Merah
Novel PROXYL catholyte materials for high voltage aqueous organic redox flow batteries
L. Pastor-Muñoz, M. Agirre, M. Palermo, N. Marquinez, A. Beloki-Arrondo, N. Casado, J. Carrasco and E. Sánchez-Díez
Molecular insights into zinc stearate nanoparticle-modified polyurethane foam for efficient water–oil separation
Sadati F., Tamsilian Y. and Behbahani R.M.
Special Issue on “Polymer Electrolytes for Zero Carbon Emissions”
Mecerreyes D.
Protein-Directed Nucleation and Stabilization of Ultrasmall Silver Nanoparticles Within BSA Hydrogels
Salto-Giron C., Gonzalez-Garcia M.C., Mañas-Torres M.C., Lopez-Lopez M.T., Alvarez de Cienfuegos L., Hueso J.L., Orte A. and Garcia-Fernandez E.
Decoupling the Roles of Chain Length, Entanglements, and Intermolecular Interactions on the Melt Memory of Semicrystalline Polar Homopolymers
Aboudzadeh M.A., Sangroniz L., Coulembier O., Ferranti M., Costanzo S., Grizzuti N., Cavallo D. and A.J. Müller
Artificial Intelligence (AI) in Cancer Diagnosis and Targeting
Momtaz F., Momtaz E., Momtaz M., Aboudzadeh M.A. and Rahdar A.
From process design to application: kinetics, techno-economic assessment, and polymerization of biomass-derived 1,5-pentanediol
Barredo Vinuesa A., Valle A., Requies J.M., Alam M.S., Sangroniz A., Agirre I. and Gandarias I.
Ambient operando self-healing in tin perovskite solar cells
Minguez-Avellan M., Solis O.E., Farinós-Navajas N., Betancur P.F., Pascual J., Ripolles T.S., Abargues R. and Boix P.P.
Auto-Generated Valence States in Electrocatalysts for Boosting Oxygen and Hydrogen Evolution Kinetics in Alkaline Water/Alkaline Seawater/Simulated Seawater/Natural Seawater
Tiwari J.N., Bhaskaran G., Kumar K., Huh Y.S. and Han Y.-K.
Molecular investigation of optimal zinc stearate nanoparticles to modified polyurethane foam and effect of temperature, salinity and pH on stability surface
Sadati F., Behbahani R.M. and Tamsilian Y.
Engineering piezoelectric polymers and peptides for soft biomedical interfaces
Serrano-Bellido B., A.J. Müller and Criado-Gonzalez M.
Towards Carbon-Additive-Free LFP Electrodes via PEDOT:Polyacrylic Binders
Jagodzinski K., Ibisate U., Ganczarczyk R., Casado N. and Boaretto N.
Advances in Polyurethane Synthesis, From 2010 to 2025
Fonseca L.P., Lopez de Pariza X., de Morais Zanata D., Lima de Menezes R.N. and Sardon H.
Solid Soft Electrolytes for Bioelectronic Devices
Aziz I.A., Criado-Gonzalez M. and Mecerreyes D.
Engineering sustainable food packaging with dextran and ß-glucans: Mechanisms, performance, and prospects
Cui W., Li X., Ananthi P., Zhang W., Lopusiewicz, Goksen G., Tosif M.M., Merino D. and Wang X.
Synthesis of phytochemical-capped silver nanoparticles using Anoda cristata extract and their activity against multidrug-resistant Gram-Negative bacteria
C. De la Luz A., C. Arellano S., Román-Escudero L.S., Silva-González N.R., Rojas-Ruiz N.E., Salazar-Kuri U. and M. Aguilar N.
Foam-to-foam recycling of non-isocyanate polyurethane foams via complete revalorization of depolymerization products
Lechuga-Islas V.D., Bourguignon M., Anas M., A.J. Müller, Grignard B. and Detrembleur C.
Polymerized Ionic-Liquid Electrolytes with Borate Mixed-Anion Chemistry: Structure, Ion Transport, and Thermal Properties
Guiraud M., Zhang Y., Chen F., O’Dell L., Chotard J.-N., Forsyth M., Kar M. and Makhlooghiazad F.
Supramolecular Biopolymer/Prussian Blue Hydrogels as Injectable Semisolid Electrodes for Shape-Conformable Electrochemical Energy Storage Devices
Peñas-Núnez S.J., Cavusoglu K., Lashkari S., Ruiz V., Villaluenga I., Mecerreyes D., Ventosa E. and Criado-Gonzalez M.
Toward Sustainable Smart Packaging: Demonstration of Laser-Induced Graphene Sensors on Orange-Based Substrates
Gómez-Gijón S., Mebarek S., Yadav E., Houeix Y., Ibba P., Merino D. and Rivadeneyra A.
Against the Segmental Relaxation of the Chain Network: Activating the Ductile Mechanism of Both Glassy and Semicrystalline PLLA
Larrañaga X., Rodriguez B.J., J.R. Sarasua and Zuza E.
Multifunctional Photochromic Piezoionic Eutectogels Through Interfacial Nanoparticle Engineering
Carrasco-Saavedra S., Urain A., Casado N., Abdel Aziz I., Lopez-Larrea N., Rangel-Miranda D., Fonseca-Hernández G.A., Tanguy N., Mecerreyes D. and Mota-Morales J.D.